File name CX_500_E.pdf

Thank you very much for purchasing the CX-500/400/300. · To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read through this manual completely and store it in a safe location. Unauthorized copying or transferral, in whole or in part, of this manual is prohibited. The contents of this operation manual and the specifications of this product are subject to change without notice. The operation manual and the product have been prepared and tested as much as possible. If you find any misprint or error, please inform us. Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur through use of this product, regardless of any failure to perform on the part of this product. Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur with respect to any article made using this product. · · · · · Table of Contents 1 Checking Supplied Items ... 3 2 Part Names and Functions ... 3 2-1 Front View ... 3 2-2 Rear View... 4 2-3 Operation Panel ... 4 3 Setup ... 5 3-1 Setting Up ... 5 3-2 Connection ... 6 3-3 Turning on the Power ... 7 3-4 Installing and Setting Up the Driver ... 7 4 Basic Operation ... 8 4-1 Loading the Material (Roll Material) ... 8 4-2 Installing a Blade ... 14 4-3 Adjusting the Blade Force and Cutting Speed ... 15 4-4 Setting the Origin Point ... 17 4-5 Star